🔧 External Chamfer Deburring Tool – Tungsten Carbide Bolt Repair Bit
🔧 External Chamfer Deburring Tool – Tungsten Carbide Bolt Repair Bit
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
🔧 External Chamfer Deburring Tool – Tungsten Carbide Bolt Repair Bit
CLEANER EDGES.
SMOOTHER ASSEMBLY.
Make metalworking and DIY projects easier with a compact External Deburring Tool. Designed to remove unwanted burrs, chamfer rough edges and smooth the outer ends of compatible screws, bolts, threaded rods and metal pipes. A practical workshop accessory for cleaner edge finishing and easier assembly preparation.

FROM ROUGH TO REFINED.
Rough or damaged outer edges can make metal components more difficult to handle and assemble. This external deburring tool helps clean up unwanted burrs and create a smoother chamfered finish on compatible threaded fasteners and metal edges.
Remove unwanted burrs and irregular material along compatible outer edges.
Create a cleaner edge profile to help prepare components for assembly.
Finishing results depend on workpiece material, hardness, condition, drill speed and applied pressure.

THREE CUTTING BLADES.
ONE PRACTICAL TOOL.
Built with three YG8 carbide cutting blades arranged inside the blue metal cutting head. The multi-blade design works on compatible external edges to help remove burrs and form a smoother chamfer.
Three cutting edges designed for external deburring and edge finishing.
A 1/4-inch hex connection for compatible drill chucks.
Compact construction for convenient workshop handling and storage.

ONE TOOL. MULTIPLE METALS.
Take on a variety of metalworking tasks with one compact external deburring attachment. Suitable for compatible workpieces made from different metal materials, depending on their hardness and condition.
For compatible threaded components and edges.
For workshop fastener finishing tasks.
For suitable aluminum components.
For compatible copper workpieces.
For suitable external edge applications.
For compatible metalworking projects.
Cutting performance varies with material hardness. Confirm compatibility before use. This tool is designed for external edge deburring, not internal pipe deburring.

FITS YOUR DRILL.
READY FOR YOUR PROJECT.
The standard 1/4-inch (6.35 mm) hex shank is designed for use with many compatible drill chucks. Connect the tool to your workshop drill setup and use it for external deburring on suitable fasteners ranging from 3 mm to 19 mm in diameter.
6.35 mm standard hex connection.
Approximately 1/8'–3/4' compatible fastener diameter.
For compatible cordless drill chucks.
For compatible chuck-equipped equipment.
Compatibility depends on the drill chuck and workpiece dimensions. Check that the shank is securely clamped before operation.

COMPACT SIZE.
PRACTICAL DESIGN.
A compact metalworking attachment designed to fit conveniently into your toolbox. Review the measurements below to check the tool's dimensions and connection size before ordering.
| Overall Length | Approx. 61 mm / 2.40 in |
|---|---|
| Hex Shank Width | 6.35 mm / 1/4 in |
| Shank Length | Approx. 32.5 mm |
| Head Length | Approx. 28.5 mm |
| Head Outer Diameter | Approx. 29 mm |
| Head Inner Diameter | Approx. 23 mm |
| Applicable Diameter | 3–19 mm |
| Blade Count | 3 Cutting Blades |
All dimensions are approximate. Please allow slight measurement variations. The 3–19 mm range refers to compatible workpiece diameter, not the tool head diameter.

READY FOR YOUR NEXT PROJECT.
From routine mechanical maintenance to hands-on DIY work, this external deburring attachment is a useful addition to a well-equipped workshop. Use it to help prepare compatible metal components before fitting and assembly.
Clean up rough external metal edges.
Deburr compatible pipe outer edges.
Prepare compatible fasteners for fitting.
Useful for routine workshop maintenance.
Secure the workpiece before use. The tool is intended for external edge finishing and should not be used for internal pipe deburring.

A CLEANER EDGE IN 5 SIMPLE STEPS.
Follow these basic steps to prepare the tool and workpiece for controlled external deburring.
Insert the 1/4-inch hex shank into a compatible drill chuck and tighten it securely.
Clamp the metal workpiece firmly to prevent movement during operation.
Position the cutting head over the rough outer edge of the compatible workpiece.
Operate at a controlled low speed using light, steady pressure. Avoid forcing the tool.
Stop the drill, inspect the result and repeat carefully if additional finishing is needed.

Safety first: Wear appropriate eye protection, secure the workpiece, keep hands away from rotating parts and follow the drill manufacturer's operating instructions. Disconnect power before changing or adjusting the attachment.
PRODUCT SPECIFICATIONS.
Everything you need to know about the external deburring attachment.
| Product Name | External Deburring Tool |
|---|---|
| Color | Metallic Blue |
| Blade Material | YG8 Carbide |
| Number of Blades | 3 |
| Shank Type | 1/4' Hex Shank (6.35 mm) |
| Applicable Diameter | 3–19 mm (Approx. 1/8'–3/4') |
| Head Outer Diameter | Approx. 29 mm |
| Head Inner Diameter | Approx. 23 mm |
| Total Length | Approx. 61 mm |
| Main Applications | External Deburring, Chamfering & Edge Smoothing |
| Package Includes | 1 × External Deburring Tool |
Drill, metal workpieces and other accessories shown in product images are for demonstration purposes only and are not included.
EVERYTHING YOU NEED TO KNOW.
What does this external deburring tool do?
It is designed to remove unwanted burrs, chamfer rough edges and smooth the outer ends of compatible screws, bolts, threaded rods and metal pipes.
What size fasteners can it work with?
The tool is designed for compatible external deburring applications on workpieces ranging from approximately 3 mm to 19 mm in diameter (1/8'–3/4').
How many cutting blades does it have?
It features three YG8 carbide cutting blades arranged inside the cutting head.
Will it fit my cordless drill?
The tool has a standard 1/4-inch (6.35 mm) hex shank designed for many compatible cordless drills, corded drills and drill presses with suitable chucks.
Can it deburr the inside of a metal pipe?
No. This product is designed for external edge deburring. It is not intended for internal pipe deburring.
What materials can it be used on?
It is suitable for compatible stainless steel, carbon steel, aluminum alloy, copper, cast iron and other metal workpieces. Performance varies depending on material hardness and condition.
How should I operate the tool?
Secure the workpiece, mount the hex shank firmly, align the cutting head with the outer edge and operate the drill at a controlled low speed using light, steady pressure.
Does the package include a drill?
No. The package includes one external deburring tool only. Drills and workpieces shown in the pictures are for demonstration purposes and are not included.
What is the total length of the tool?
The overall length is approximately 61 mm (2.40 inches). The head and shank dimensions are shown in the product size illustration.
What safety precautions should I follow?
Wear safety glasses, secure your workpiece, use a controlled low speed, avoid excessive pressure and keep your hands away from rotating parts. Follow your drill manufacturer's safety instructions.
CLEANER EDGES.
BETTER PREPARATION.
Bring more convenience to your metalworking projects with three YG8 carbide blades, a standard 1/4-inch hex shank and a versatile 3–19 mm working range. A compact addition to your workshop, garage or DIY toolbox.
Confirm workpiece and drill compatibility before use. One external deburring tool included. Drill not included.
